All About Assessment Validation and How to Validate Assessments

All About Assessment Validation and How to Validate Assessments

Blog Article

Upon receiving registration, RTOs must manage various responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, with validation being a notably arduous task.

While we've discussed validation in multiple articles, let's return to the basics. ASQA defines validation as a quality check of the assessment process.

Validation is the process of confirming accurate areas in an RTO's assessment process and pinpointing elements for improvement. With a correct understanding of its components, it’s less daunting.

As stated in Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

According to the standards, RTOs must conduct two types of validation.

The initial type of assessment validation ensures compliance with the training package assessment requirements within your RTO's scope.

The second validation ensures assessments are conducted according to the principles of assessment and rules of evidence.

This implies that we validate both prior to and following the assessment. The focus of this article is on the first type: assessment tool validation.

The Basics of the Two Types of Assessment Validation

A Deep Dive into Assessment Validation

As mentioned earlier and in one of our previous blog posts, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, known as pre-assessment validation, pertains to the first part of the clause, focusing on meeting all unit requirements and ensuring total workbook compliance.

Conversely, post-assessment validation focuses on the implementation side, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.

For this piece, our emphasis will be on assessment tool validation.

How Assessment Tool Validation is Conducted

Having distinguished between the two types of validation, let’s dive into the details of assessment tool validation.

Ideal Times to Conduct Assessment Tool Validation

Assessment tool validation aims to verify that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.

Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.

You don't have to wait until your next 5-year validation schedule. Validate new resources right away to ensure they’re appropriate for student use.

However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:

- you update your resources
- new training products are added by you on scope
- you review your course against training product updates
- your learning resources get identified as a risk during your risk assessment

ASQA's risk-based regulation approach means RTOs should perform regular risk assessments. If students complain about learning resources, it's a perfect time for assessment tool validation.

Selecting Training Products for Validation

Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.

Resources Required for Assessment Tool Validation

Learning Resources

To validate assessment tools, you need the complete suite of your learning resources:

Mapping tool – begin with this document. It details which assessment items correspond to unit requirements, aiding faster validation.

Learner/student workbook – check its suitability as an assessment tool during validation. Ensure instructions are clear and answer fields are sufficient. This is a common issue.

Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are present. Clear benchmarks are key to reliable assessment outcomes.

Other related resources – such as checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are suitable for the assessment task and address unit requirements.

Validation Board

Clause 1.11 specifies the criteria for validation panel members, indicating that validation can involve one or more persons. RTOs usually require all trainers and assessors to participate, sometimes including industry experts.

As a whole, your validation panel must have:

Vocational competencies and current industry skills relevant to the unit being validated

Up-to-date expertise and skills in vocational teaching and learning

Any one of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or its future version

Validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists in both the validation process and documentation. It simplifies identifying how each assessment item corresponds to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.

Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are accessible online. These tools typically have validators examine the tools in their entirety to determine if they meet the principles of assessment.

Principles of Assessment Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.

It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:

Element Performance Criteria Assessment Directions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Should Be Checked?

As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.

Assessment Basic Principles
Fairness – Is the assessment process equitable and accessible to everyone?

Flexibility – Does the assessment offer various ways to demonstrate competence according to different needs and preferences?

Validity – Does the assessment assess what it is intended to assess? Is it a valid tool for measuring the required skill or knowledge?

Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?

Key Rules of Evidence

Validity – check here Does the evidence demonstrate that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to ensure the learner has the required skills and knowledge?

Authenticity – Does the assessment tool verify that the work is the candidate’s own?

Currency – Are the assessment tools reflective of current units of competency and contemporary industry practices?

Despite being regularly covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.

To prevent using learning resources that do not meet some unit requirements, make sure to follow these guidelines:

Show What You Mean

Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Perform each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

nappy change

prepare bottles, bottle-feed babies, and clean equipment

prepare solid foods and feed infants

respond suitably to infant signs and cues

prepare infants for sleep and settle them

monitor and encourage physical exploration and gross motor skills suitable for the age

Getting students to describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Be Mindful of Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby is not sufficient.

All or No Competence

Pay attention to lists. Again, as illustrated above, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Clarify Further?

Every assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What details can be included in a work package?

The answer may include:

Obligatory resources

Relevant expenses

Activity duration

Appointed duties and responsibilities

If an assessment item calls for several answers, specify the number of answers needed from a student. This ensures your assessment is reliable, and the evidence gathered is valid.

The same applies to assessment items with double-barrelled questions or those that ask for multiple answers simultaneously. Such questions can confuse both students and assessors, as illustrated in the example below:

Name a hazard and/or environmental issue in the workplace and choose the most effective hazard control hierarchy.

Answers might include, but are not limited to:

Weather conditions – isolating the work area, engineering controls, PPE

Work area and ground conditions – eliminating hazards, isolation, engineering

People – isolating, use of engineering controls, administration

Structural hazards – substitution, isolation, use of engineering controls

Chemical hazards – isolation, engineering, administrative controls

Equipment or machinery – isolation, engineering controls, administration

Avoiding double-barrelled questions simplifies responses for students and allows assessors to accurately judge student competence.

Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.